搜索
Search
imgboxbg
Location:
Home
/
News center

NEWS CENTER

Check category
Check category
imgboxbg

Add：No. 38 Qing Long Shan Road, Binhu District, Wuxi China 
Tel：86-510-85505988
Fax：0510-85515848
E-mail：sjm@wxsusun.com

NEWS CENTER

Wuxi Susun Autoparts Company Limited

Wuxi Susun Autoparts Company Limited is a company specializing in the design, development and manufacturing of starters and alternators for the automotive industry. In 2011
Click to see more
30
2022-06

Maintenance of the stator

Time of issue:2022-06--30
Maintenance of the stator: The stator has 4 sets of coils, 4 carbon brushes, and 4 compression springs on the carbon brushes. Remove the carbon brushes from the compression springs, and grind the joint surface of the carbon brushes and the copper head slightly (in the form of a arc), the back cover of the stator (also the back cover of the starter), is another service point (the tail shaft of the rotor), and the back cover sleeve is filled with grease.
查看详情 查看详情
30
2022-06

Generator Maintenance

Time of issue:2022-06--30
After the fuel tank is used for a period of time, some minerals or impurities will generally precipitate at the bottom of the tank, which should be removed or purified regularly. Otherwise, it will have a huge impact on the normal operation of the plunger and the fuel injection head, resulting in inaccurate fuel supply time, uneven fuel supply, and poor fuel atomization, resulting in increased fuel consumption and reduced power.
查看详情 查看详情
30
2022-06

How to maintain the starter

Time of issue:2022-06--30
The maintenance of the starter can be done by yourself, and the lubrication parts are mainly the two ends of the rotor.
查看详情 查看详情
30
2022-06

How to maintain the generator

Time of issue:2022-06--30
Generator maintenance method: purify the impurities in the fuel tank in time to avoid the phenomenon of inaccurate oil supply time; remove the carbon deposits in time, because the temperature of the relevant parts will rise when the generator is working, which will easily cause the ash carbon polymer to adhere to the valve and other places. It should be cleaned in time; keep the water temperature, the cooling water temperature of the generator is kept at about 45-65 degrees; regular inspection, regular inspection and adjustment of valve clearance, fuel injection pressure, fuel supply time, etc., can keep the generator in good working condition.
查看详情 查看详情
30
2022-06

How the starter works

Time of issue:2022-06--30
The working principle of the starter is that when the ignition switch is closed, the two coil windings are energized. Since the resistance of the pull-in coil is small, the current passing through is large. This coil is connected in series with the motor circuit. Under the action of the current, the motor will Rotate slowly to facilitate engagement of the pinion and flywheel.
查看详情 查看详情
Previous page
1
2

Copyright @ 2017  Wuxi Susun Autoparts Company Limited      苏ICP备05039721号-1       www.300.cn wuxi       About  |  Contact  SEO

Consult

Consult

QQ

QQ

Telephone

0510-85505988

WeChat

Scan to add
WeChat

TOP